TPMS Reset Procedure
Make:Chevrolet Model:Aveo5 Sub-Model:LT Year:2009, 2010, 2011

Required Tools

None

 

 

 

Preparation

1.   Review all data in your owner’s manual pertaining to your TPMS system.  

Installation

Note: This step should be performed only by a tire technician who has been properly trained in the operation and installation of TPMS systems.

1.   Install Sensors - Properly install tire pressure sensors. 

2.   Tire Pressure - Confirm all tires are inflated to the pressure indicated on tire placard. (the tire placard is located on the door jam of your vehicle)

 

This is a sample tire pressure placard.

Not for this specific vehicle.

3.   Eliminate Interference - To ensure the control unit memorizes the correct sensor ID, the vehicle with the new sensor must be at least 3 m. (10 ft.) from any other TPMS pressure sensor not installed on that vehicle.

Relearn

1.   Drive vehicle above 19mph for a minimum of 30 seconds.

 

© Revolution Supply Co. Inc. 2012