TPMS Reset Procedure
Make:Smart Model:Fortwo Sub-Model:Brabus Year:2010, 2009

Required Tools

None

 

Preparation

1.   Review all data in your owner’s manual pertaining to your TPMS system.

Installation

Note: This step should be performed only by a tire technician who has been properly trained in the operation and installation of TPMS systems.

1.   Install Sensors - Properly install tire pressure sensors. 

2.   Tire Pressure - Confirm all tires are inflated to the pressure indicated on tire placard. (the tire placard is located on the door jam of your vehicle)

 

This is a sample tire pressure placard.

 

Not for this specific vehicle.

3.   Eliminate Interference - To ensure the control unit memorizes the correct sensor ID, the vehicle with the new sensor must be at least 3 m. (10 ft.) from any other TPMS pressure sensor not installed on that vehicle.

Relearn

1.   Press the TPMS restart button located on the cockpit switch panel.

2.   The TPMS warning light on the instrument cluster momentarily flash to indicate relearn has been initiated.

3.   Drive the vehicle for a few minutes to allow the system to verify that the pressure is within range.

 

© Revolution Supply Co. Inc. 2012