TPMS Reset Procedure
Make:Saab Model:9-4X Sub-Model:Premium Year:2011
Before performing the re-learn procedure below, please review all data in your owner’s manual pertaining to your TPMS system.


1.     Properly install tire pressure sensors.


This step should be performed only by a tire technician who has been properly trained in the operation and installation of TPMS systems.


2.     Confirm all tires are inflated to the pressure indicated on tire placard. (located in the door jam of your vehicle)

This is a sample tire pressure placard.

Not for this specific vehicle.




3.     Drive the vehicle at 20 km/hr for more than 10 minutes in order for the sensor ID’S to be learned into the system.



4.     The TPMS warning light should go out.


5.     If after 10 minutes the system cannot communicate with 1 or more of the sensors, a “SYSTEM FAULT” warning message is displayed.


6.     If this happens, see your authorized dealer to have your system checked out.
© Revolution Supply Co. Inc. 2010