TPMS Reset Procedure
Make:Mercedes-Benz Model:GL350 Sub-Model:Bluetec 4Matic Year:2010, 2011, 2012, 2013, 2014, 2015, 2016
Before performing the re-learn procedure below, please review all data in your owner’s manual pertaining to your TPMS system.


1.     Properly install tire pressure sensors.


This step should be performed only by a tire technician who has been properly trained in the operation and installation of TPMS systems.


2.     Confirm all tires are inflated to the pressure indicated on tire placard. (located in the door jam of your vehicle)

This is a sample tire pressure placard.

Not for this specific vehicle.


 1. Ensure all tires are inflated to the pressure listed on the tire placard.

2. Turn ignition to ON position (engine off).

3. Press FORWARD/BACK button on steering wheel until trip and odometer are


4. Press UP/DOWN button until tire inflation pressure monitor is displayed.

5. Hold down reset button (located on instrument cluster) until “Monitor Current

Tire Pressure?” is displayed.

6. Press + button, “Tire Press. Monitor-Activated!-Press. Display After Driving a Few

Mins.” is displayed.

7. If “Reactivate-Tire Press. Monitor!” appears, repeat relearn procedure.

8. If “Tire Pressure-Check Tires!” appears, indicates tire pressure too low, adjust

pressures accordingly.

Relearn New Sensor IDs

1. Ensure all tires are inflated to the pressure listed on the tire placard.

2. Vehicle must be driven for at least 10 minutes while maintaining speed above 30

mph in order for system to learn new sensor IDs.

3. If spare tire sensor ID is being programmed, a properly formatted scan tool is